Description
Pressure Sensor -14.5 PSI (-1 Bar) to 30 PSI (2 Bar) with NMEA2000 interface is best used for RACOR Filters.
The Sensor outputs standard NMEA2000 PGN. As a result, any NMEA2000 system or Multi Function Display (MFD) that supports standard NMEA2000 pressure PGNs, can read the sensor’s values. Custom alarms and warnings for the status of your fuel filter are available if the sensors are used with Pulse Vessel Monitoring and alarm system.
Best suitable for measuring vacuum between RACOR fuel filers and engine. InIt If the vacuum increase, it will be indication of the fuel filters getting contaminated. Instead of going to the engine room to look at your RACOR mechanical gauge, this sensor will bring the information directly to your Multi Function Display (MFD) or even better to your Pulse Vessel Monitoring and alarm system. Simple to plumb and install on a “Tee” next to your mechanical RACOR gauge.
PGNs supported :
PGN59392 ISO Acknowledgement
PGN59904 ISO Request
PGN60160 Multi packet data transfer, TP.DT
PGN60416 Multi packet connection management
PGN60928 ISO Address Claim
PGN65240 Commanded Address
PGN126208 NMEA Request/Command/Acknowledge group function
PGN126464 PGN List (Transmit and Receive)
PGN126993 Heartbeat
PGN126996 Product information
PGN126998 Configuration information
PGN130314 Pressure
Configurable via WiFi Interface for the following pressure types:
- Atmospheric Pressure
- Water Pressure
- Steam Pressure
- Compressed Air Pressure
- Hydraulic Pressure
- Filter Pressure
- Altimeter Pressure
- Oil Pressure
- Fuel Pressure
Jordan –
https://panbo.com/across-ocean-systems-nmea-2000-pressure-sensor-smart-useful/
Jordan –
Check the review on Panbo.com